Danby DPAC10010 Instrukcja Użytkownika Pobierz pdf (Strona 7)

AIR CONDITIONING

NOTE: The exhaust hose must be properly vented outdoors during air

conditioning mode.

1) Press the POWER SWITCH key (Fig. A) to switch on the unit, and the

previous set temperature will be shown in the temperature display area of the

control panel.

2) Press the MODE key (Fig. B) until the COOL indicator light illuminates on the

control panel (Fig.C). Each depression of the MODE key will advance to a

different mode setting (Cool- Dehumidifier-Fan)

3) Press the appropriate increase or decrease buttons (Fig. D1 & D2) to

select a suitable operating temperature setting. Temperature settings are

adjustable between 16°C (61°F) to 32°C (89°F).

4) Press the FAN key (Fig. E) to select the desired fan speed setting (Auto-High-

Med.-Low). Your selection will appear on the control panel (each depression of

the fan key will advance to a different setting).

• Cooling stops automatically when the set temperature is achieved. Cooling

resumes when the room temp. rises above the “set” temperature level.

DEHUMIDIFIER:

NOTE: The exhaust hose does NOT have to be vented outdoors during

dehumidifier mode.

1) Press the ON/OFF key pad to switch the unit on (Fig. A)

2) Press the MODE key (Fig. B) until the DRY indicator illuminates on the

control panel (Fig. G).Each press of the MODE key will advance to a different

mode setting (Cool-Dehumidifier-Fan).

3) If room temperature is 25°C (77°F), fan speed can be adjusted. Press the Fan

key (Fig. E) to select the desired FAN SPEED setting. Your selection will

appear on the contol panel. Each depression of the fan key will advance to a

different fan speed (High- Med.- Low) as shown in Fig. F. Otherwise, fan

speed is fixed to “low”.

Note: THE WARM AIR EXCHANGE HOSES MUST VENT INSIDE THE

ROOM WHEN USING DEHUMIDIFY MODE, NOT OUTSIDE AS IT DOES

WHEN COOLING.

FAN:

NOTE: During Fan Mode, the exhaust hose does NOT have to be vented

outdoors.

1) Press the POWER SWITCH key pad to switch the unit on (Fig. A).

2) Press the MODE key (Fig. B) until the FAN indicator illuminates on the

control panel (Fig. C). Each press of the MODE key will advance to a different

mode setting (Cool- Dehumidifier-Fan).

3) Press the FAN Key (Fig. E) to select the desired FAN SPEED setting. Your

selection will appear on the control panel. Each press of the fan key will

advance to a different fan speed (High- Med- Low) as shown in Fig. F.

Fig. A

Fig. B

Fig. C

Fig. E

Fig. F

OPERATION (cont’d)

Fig. D1

Fig. D2

IMPORTANT: The drain

hose must be installed during

dehumidifier mode.

Drain Hose (79” / 200cm)

Fig. G

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Komentarze do niniejszej Instrukcji

Brak uwag

Danby DPAC10010 Instrukcja Użytkownika Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Klimatyzatory mobilne Danby DPAC10010